User manual
117
WEB BROWSER-BASED CONFIGURATION
3. The maximum addressable size of a single volume set is not
limited to 2 TB because the controller is capable of 64-bit mode.
However, the operating system itself may not be capable of ad-
dressing more than 2 TB. See the Areca website for details.
To create a volume set on a RAID set, move the cursor bar to the
main menu and click on the “Create Volume Set” link. This “Select
The Raid Set To Create On It” screen will show all RAID set num-
bers. Click the RAID set number that to be used and then click
the “Submit” button.
The “Enter Volume Attributeid Set=xx” option allows users to
select the volume name, capacity, RAID level, strip size, SCSI
ID/LUN, cache mode, and tag queuing.
• Volume Name
The default volume name will always appear as “Volume Set.
#”. You can rename the volume set providing it does not exceed
the 15 characters limit.
•
Raid Level
Set the RAID level for the volume set. Highlight the desired
RAID Level and press Enter key. The available RAID levels for
the current volume set are displayed. Select a RAID level and
press "Enter" to conrm.
• Capacity
The maximum volume size is the default initial setting. Enter
the appropriate volume size to t your application.
• Greater Two TB Volume Support
If volume capacity exceeds 2TB, controller will show the