User manual

WEB BROWSER-BASED CONFIGURATION
116
tion. The RAID controller uses the time as the RAID set signature.
The RAID set may have different time after the RAID set is recov-
ered. The “SIGANT” function can regenerate the signature for the
RAID set.
6.5.8 Ofine Raid Set
This function is for customer being able to unmount and remount
a multi-disk volume. All Hdds of the selected RAID set will be put
into ofine state, spun down and fault LED in fast blinking mode.
User can remove those Hdds and insert new Hdds on those empty
slots without needing power down the controller.
6.6 Volume Set Functions
A volume set is seen by the host system as a single logical device.
It is organized in a RAID level with one or more physical disks.
RAID level refers to the level of data performance and protection of
a volume set. A volume set capacity can consume all or a portion
of the disk capacity available in a RAID set. Multiple volume sets
can exist on a group of disks in a RAID set. Additional volume sets
created in a specied RAID set will reside on all the physical disks
in the RAID set. Thus each volume set on the RAID set will have its
data spread evenly across all the disks in the RAID set.
6.6.1 Create Volume Set
1. Volume sets of different RAID levels may coexist on the same
RAID set.
2. Up to 16 volume sets can be created by the SATA RAID control-
ler.