User manual
WEB BROWSER-BASED CONFIGURATION
112
The number of physical drives in the SATA RAID controller deter-
mines the RAID levels that can be implemented with the RAID set.
You can create a RAID set associated with exactly one volume set.
The user can change the RAID level, stripe size, and capacity. A hot
spare option is also created depending upon the existing congura-
tion.
Click the “Conrm The Operation” check box and click on the “Sub-
mit” button in the “Quick Create” screen, the RAID set and volume
set will start to initialize.
Note:
If volume capacity exceeds 2TB, controller will show the
"Greater Two TB Volume Support" sub-menu. Greater Two TB
Volume Support option: No, 64bit LBA and For Windows.
For more details please download PDF le from ftp://ftp.
areca.com.tw/RaidCards/Documents/Manual_Spec/
Over2TB_050721.zip
6.5 RaidSet Functions
Use the “Raid Set Functions” and “Volume Set Functions” if you
prefer to customize your system. Manual conguration can provide
full control of the RAID set settings, but it will take longer to com-
plete than the “Quick Volume/Raid Setup” conguration. Select the
“Raid Set Functions” to manually congure the RAID set for the
rst time or delete and recongure existing RAID sets. (A RAID set
is a group of disks containing one or more volume sets.)
6.5.1 Create Raid Set
To create a RAID set, click on the “Create Raid Set” link. A “Se-
lect The Drive For RAID Set” screen will be displayed showing the
drive(s) connected to the current controller. Click on the selected
physical drives within the current RAID set. The default RAID set
name will always appear as “Raid Set. #”.
Click the “Conrm The Operation” check box and click on the
“Submit” button on the screen; the RAID set will start to initialize.