User manual

105
ARCHTTP PROXY SERVER INSTALLATION
Scanning PCI Device: Select “Yes” for ARC-1XXX series adapter
Scanning RS-232 Device: No
Scanning Inband Device: No
• Mail Conguration
When you open the mail conguration page, you will see following
settings:
SMTP server IP Address: Enter the SMTP server IP address which is
not McRAID storage manager IP. Ex: 192.168.0.2
Sender Name: Enter the sender name that will be shown in the
outgoing mail. Ex: RaidController_1
Mail address: Enter the sender email that will be shown in the out-
going mail, but don’t type IP to replace domain name.
Ex: [e-mail]
Account: Enter the valid account if your SMTP mail server need au-
thentication.
Password: Enter the valid password if your SMTP mail server need
authentication.