User manual
101
ARCHTTP PROXY SERVER INSTALLATION
5.2 For Linux
You should have administrative level permissions to install SATA
RAID software. This procedure assumes that the SATA RAID hard-
ware and Linux are installed and operational in your system.
The following details the Linux installation procedure of the SATA
RAID controller software.
The ArcHttp proxy server is provided on the software CD delivered
with SATA card or download from the www.areca.com.tw. The
rmware embedded McRAID storage manager can congure and
monitor the SATA RAID controller via ArcHttp Proxy Server.
1. Login as root. Copy the ArcHttp le to a local directory.
(1). Insert the SATA RAID controller CD in the CD-ROM drive.
Click on the “Start” button in the Windows task bar and then
click “Program”, select the “McRAID” and run “ ArcHttp proxy
server”. The ArcHttp proxy server dialog box appears.
1. When you select “Controller#01(PCI)” then click “Start” but-
ton. Then web broswer McRAId storage manager appears.
2. If you select “Cfg Assistant” then click “Start” button. The
“ArcHttp Conguration” appears. (Please refer to section 5.6
ArcHttp Conguration)