User manual

95
WEB BROWSER-BASED CONFIGURATION
6.2.2 Linux System
To configure SATA RAID controller on a remote machine, you need
to know its IP Address. You must first start up your local ArcHttp
proxy server. (Please reference this chapter section 6.1.1).
(1).Launch your ArcHttp proxy server by entering http://[IP Ad-
dress] in the remote web browser.
(2). When connection to the remote system is established, the
System Login screen appears. The SATA RAID controller default
User Name is “admin” and the Password is “0000”
6.3 SATA RAID controller McRAID storage
manager
The McRAID storage manager current configuration screen displays
the current configuration of your SATA RAID controller. It displays
the Raid Set List, Volume Set List and Physical Disk List. The raid
set information, volume set information and drive information can
also be viewed by clicking on the RaidSet Hierarchy screen. The
current configuration can also be viewed by clicking on RaidSet
Hierarchy in the menu.
Note:
That you must be logged in as administrator
with local admin rights on the remote machine
to remotely configure it.