User manual

DRIVER INSTALLATION

4. The “Upgrade Device Driver Wizard” popup and provides

a choice for the wizard to select. Choose “Display a list of

known drivers for this device, so that you can choose a

speciﬁc driver.” and click on Next.

5. When the next screen queries the user about utilizing the cur-

rently installed driver, click on Have Disk button.

6. When the “Install From Disk” dialog appears, insert the

SATA RAID controller driver diskette or the ship CD-ROM and

type the correct path name in the “Copy manufacturer’s ﬁles

from:”

7. The previous dialog box appears with the selected driver dis-

played as of the driver to install. Then click on Next.

8. The “Digital Signature Not Found” screen appears. Click on

Yes to continue the installation.

9. Windows automatically copies the appropriate driver ﬁles and

rebuilds its driver database.

10. The “Found New Hardware Wizard” summary screen ap-

pears Click on the Finish button.

11. The “System Settings Change” dialog box appears. Re-

move the diskette from the drive and click on Yes to restart the

computer to load the new drivers.

12. See Chapter 5 in this manual to customize your RAID vol-

umes using Storage manager.

4.2.3.1 Making Volume Sets Available to Windows

System

When you reboot the system, log in as system administrator.

Continue with the following steps to make any new disk arrays

or independent disks accessible to Windows 2000/XP/2003. This

procedure assumes that the SATA RAID controller hardware,

driver, and Windows are installed and operational in your sys-

tem.