User manual

BIOS CONFIGURATION
66
3.7.4.2 Create Pass-Through Disk
Disk is no controlled by the SATA RAID controller firmware and
thus cannot be a part of a Volume Set. The disk is available to
the operating system as an individual disk. It is typically used on
a system where the operating system is on a disk not controlled
by the SATA RAID controller firmware. The SCSI Channel, SCSI
ID, SCSI LUN, Cache Mode, and Tag Queuing.
3.7.4.3 Modify Pass-Through Disk
Use this option to modify the Pass-Through Disk Attribute. To
modify Pass-Through Disk parameters values from Pass-Through
Disk pool, move the cursor bar to the Physical Drive Function
menu and select the Modify Pass-Through Drive option and then
press Enter key. The Physical Drive Function menu will show all
Raid Pass-Through Drive number option. Move the cursor bar to
a desired item, then press Enter key to show all Pass-Through
Disk Attribute. Select the parameter from the list you which to
change, press Enter key to modify it.
































