User manual
BIOS CONFIGURATION
57
The maximum volume size is default in the first setting. Enter
the appropriate volume size to fit your application. The capacity
can also increase or decrease by the UP and DOWN arrow key.
Each volume set has a selected capacity which is less than or
equal to the total capacity of the raid set on which it resides.
• Strip Size
This parameter sets the size of the segment written to each
disk in a RAID 0, 1, 3, or 5 logical drive. You can set the stripe
size to 4 KB, 8 KB, 16 KB, 32 KB, 64 KB, or 128 KB.
• Capacity