User manual

BIOS CONFIGURATION
54
on all the physical disks in the Raid Set. Thus each Volume Set on
the Raid Set will have its data spread evenly across all the disks
in the Raid Set.
3.7.3.1 Create Volume Set
1. Volume sets of different RAID levels may coexist on the same
raid set.
2. Up to 16 volume sets in a raid set can be created by the
SATA RAID controller.
3. The maximum addressable size of a single volume set is 2
TB(32-bit mode).
To create a volume set, follow the following steps:
1. Select the Volume Set Function from the Main menu.
2. Choose the Create Volume Set from Volume Set Functions
dialog box screen.
3. The Create Volume From Raid Set dialog box appears. This
screen displays the existing arranged raid sets. Select the raid
set number and press Enter key. The Volume Creation is dis-
played in the screen.
4. A window with a summary of the current volume set’s set-
tings. The “Volume Creation” option allows user to select the
Volume name, capacity, RAID level, strip size, SCSI ID/LUN,
Cache mode and tag queuing. User can modify the default val-
ues in this screen; the modification procedures are at 3.5.3.3
section.
























