User manual
BIOS CONFIGURATION
46
A single volume set is created and consumed all or a portion of
the disk capacity available in this raid set. Define the capacity of
volume set in the Available Capacity popup. The default value for
the volume set is displayed in the selected capacity. To enter a
value less than the available capacity, type the value and press
the Enter key to accept this value. If it only use part of the raid
set capacity, you can use the Create Volume Set option to de-
fine another volume sets
Stripe size This parameter sets the size of the stripe written to
each disk in a RAID 0, 1, 3, or 5 logical drive. You can set the
stripe size to 4 KB, 8 KB, 16 KB, 32 KB, 64 KB, or 128 KB.
A larger stripe size produces better-read performance, especially
if your computer does mostly sequential reads. However, if you
are sure that your computer does random reads more often, se-
lect a small stripe size.