User manual

HARDWARE INSTALLATION
34
Figure 2-18,
Activity LED I2C
connector con-
nected between
SATA RAID Con-
troller & 2 SATA
HDD Cages back-
plane.
Step 8. Power up the System
Safety checks the installation, reinstall the computer cover and
reconnect the power cord cables. Turn on the AC power switch at
the rear of the computer then press the power button at the front
of the host computer.
Step 9. Configure volume set
The adapter configures the RAID function through the McBIOS
RAID manager. Please reference the Chapter 3 McBIOS RAID
Manager for the detail configuration. The RAID configuration
can also be configured by McRAID storage manager. After ArcHttp
proxy server be installed. Please refernce the Chapter 6 Web
Browser-Based Configuration.
Step 10. Install the controller driver
In a new system:
• Driver installation usually takes places as part of operating sys-
tem installation. Please reference the Chapter 4 Diver Installation