User manual

HARDWARE INSTALLATION

Step 7 Install the LED cable (optional)

SATA RAID controller provides three kinds of LED status connector.

A: Global indicator connector, which lights when any drive is active.

B: Individual LED indicators connector, for each channel drive.

C: I2C connector, for SATA proprietary backplane enclosure.

The following diagram and discription will show each type of con-

nector.

Note:

A cable for the global indicator comes with your

computer system. Cables for the individual drive

LEDs may come with a drive cage, or you may

need to purchase them.

Figure 2-10 Multi-Lance Cable

Step 6-2. Connect the Multi-lance cable

Model ARC-11XX-ML have multi-lance internal connector, each of

which can support up to four SATA drives. These adapters can be

installed in a server RAID enclosure with InﬁniBand 4X connectors

(SFF-8470) backplane.

If you have not already connected your Multi-lance cables, use the

cables included with your kit to connect your controller to the Multi-

lance connector backplane. The cable connectors are all identical,

so it does not matter which end you connect to your controller or

Multi-lance backplane connector. The following diagram shows the

picture of Multi-lane cable.

Unpack and remove the PCI RAID cards. Inspect it carefully. If any-

thing is missing or damaged, contact your local dealer.