User manual

HARDWARE INSTALLATION
29
Step 6 Connect the SATA cable
Model ARC-11XX and ARC-12XX have dual-layer SATA internal con-
nector. If you have not already connected your SATA cables, use
the cables included with your kit to connect your controller to the
SATA hard drives.
The cable connectors are all identical, so it does not matter which
end you connect to your controller or SATA hard drive or cage
backplane SATA connector.
Figure 2-9 SATA Cable
Figure 2-8 Mount Cages & Drives
Step 5. Mount the Cages or Drives
Remove the front bezel from the computer chassis and install the
Cages or SATA Drives in the computer chassis. Loading drives to
the drive tray if cages are installed. Be sure that the power is con-
nected to either the Cage backplane or the individual drives.