User Manual

User’s Manual – AREBOS Drywall Sander

• In the case where the use of the power tool in a damp area is unavoidable, use a residual

current device to reduce the risk of an electrical shock.

Personal Safety

• Make sure to pay attention to what you are doing and use caution while working with a

power tool. Do not use a power tool if you are tired or under the influence of drugs, alcohol,

or medication. The slightest distraction or inattention can result in serious injury.

• Wear personal protective equipment and always protective goggles. The wearing of personal

protective equipment, such as a dust mask, slip-resistant footwear, protective helmet, or ear

protector, depending on the form or use of the power tool, reduces the risk of injury.

• Avoid an unintentional starting. Make sure that the power tool is turned off before it is

plugged into a power source and/or battery is attached, it is to be carried or picked-up. If,

while carrying the power tool, your finger is on the “on” switch or the machine is plugged in

while in the “on” position, this can result in serious injury or accident.

• Remove the adjustment tool or wrench, before turning on the power tool. A tool or wrench

that is in a rotating machine part can cause serious injury.

• Avoid using unusual body-stance or posture. Make sure to have a secure stance and able to

maintain balance. As a result, it will be easier to control the power tool in unexpected

situations.

• Wear proper clothing. Do not wear wide clothing or jewellery. Keep hair, clothing, and gloves

away from moving parts. Loose clothing, jewellery, or long hair, could get caught in the

moving parts.

• If a dust extractor or receptor can be attached, make sure that it is attached properly and is

used correctly. Use of a dust extractor can reduce the dangers of dust particles.

Careful handling while using Power Tools

• Do not overload the machine. Use the correct tool for the job. Work is better and safer with

the correct power tool within the power capacity range.

• Do not use a power tool with a defective power switch. A power tool that can no longer be

turned on or off is dangerous and must be repaired.

• Pull the plug out of the outlet and/or remove the battery, before making adjustments to the

• machine ‘s settings, change parts, or storing the machine. These extra measures will help

prevent the unexpected starting of the power tool.

• Keep unneeded power tools out of the reach of children. Do not allow the power tool to be

used by a stranger or by persons who have not read this instruction manual. Power tools are

dangerous, when they are used by inexperienced persons.

• Take care of your power tool. Check to make sure, if moving parts are functioning properly

and not locking or jamming, if parts are broken or damaged in such a way that the mode of

operation of the power tool is affected. Allow damaged parts to be repaired before using the

machine. Many accidents are caused by poorly maintained power tools.

• Keep cutting edges sharp and clean. Properly maintained cutting tools with sharp cutting

edges are less prone to jamming or locking and are easier to handle.

• Use the power tool, accessory parts, replacement parts and etc. in accordance with these

instructions. Consider the working conditions and the task at hand. Using a power tool for a

purpose other than its intended use can lead to dangerous situations.

Service

• Allow the power tool to be repaired only by qualified persons and only with the original

replacement parts. In order ensure that the safety of the machine is maintained.