User’s Manual – AREBOS Drywall Sander Drywall Sander AR-HE-LS700C8 User’s Manual Please follow all security measures in this user’s manual to ensure a secure use.
User’s Manual – AREBOS Drywall Sander Please read and save these instructions. Read through this user’s manual carefully before using product. Protect yourself and others by observing all safety information, warnings and cautions. Failure to comply with instructions could result in personal injury and/ or damage to product or property. Please retain instructions for future reference. Safety Instructions SAFETY WARNINGS WARNING! Read all safety warnings and all instructions.
User’s Manual – AREBOS Drywall Sander • • • • Remove any adjusting key or wrench before turning the power tool on. A wrench or a key left attached to a rotating part of the power tool may result in personal injury. Do not overreach. Keep proper footing and balance at all times. This enables better control of the power tool in unexpected situations. Dress properly. Do not wear loose clothing or jewellery. Keep your hair, clothing and gloves away from moving parts.
User’s Manual – AREBOS Drywall Sander • • • • • • • • • • • • of your power tool. Incorrectly sized accessories cannot be adequately guarded or controlled. Threaded mounting of accessories must match the grinder spindle thread. For accessories mounted by flanges, the arbour hole of the accessory must fit the locating diameter of the flange. Accessories that do not match the mounting hardware of the power tool will run out of balance, vibrate excessively and may cause loss of control.
User’s Manual – AREBOS Drywall Sander • • • • • • Maintain firmly the power tool and position your body and arm for you allow to resist kickback forces. Always use auxiliary handle, where applicable, for maximum control of kickback or torque reaction during startup. The operator can control the reaction torques or forces rebound, if precautions are taken. Never place your hand near the rotating accessory. The accessory can perform a bounce on your hand.
User’s Manual – AREBOS Drywall Sander Installation Description 1. 2. 3. 4. 5. 6. Plastic guard Motor Foldable button Speed adjuster Push switch Extendable handle INSTALLATION • • Before repairing or replacing any electrical parts or accessories, be sure to unplug the appliance. When opening the package, the machine is put as below. • Make sure the foldable button is well connected as below.
User’s Manual – AREBOS Drywall Sander • Insert the telescopic pipe into the front pipe, adjust to the desired length, turn the locking nut into the front plastic pipe and lock. Use • The Drywall Sander is designed for sanding walls and ceilings made of drywall or plaster. The Sander provides superior finish and is faster than conventional finishing methods for both new construction and renovation work. Clean-up time is minimized by using an external dust bag attached to the Sander.
User’s Manual – AREBOS Drywall Sander CHOOSING THE SANDPAPER • According to the material and grinding effect, choose the appropriate sandpaper.
User’s Manual – AREBOS Drywall Sander STARTING AND STOPPING THE DRYWALL SANDER • • • Make sure power circuit voltage is the same as shown on the specification plate on the sander and that the sander switch is on OFF. Connect Sander to power circuit. The Drywall Sander is equipped with a qualified switch with a lock block. Press the switch and do not loosen your hand, and this machine will remain “ON”. If you press the lock block, machine will be on even when your hand leaves the switch.
User’s Manual – AREBOS Drywall Sander SANDING OF GYPSUM JOINTS • 1. 2. 3. 4. • The Drywall Sander has a special sanding head: the head can rotate in multiple directions, allowing the abrasive pad to adjust to the work surface. This enables the operator to sand the top, middle and bottom of a wall or ceiling joint without changing its position. Turn the vacuum cleaner switch to the ON position. CAUTION: Wear an approved respirator for mist and dust. Turn the wall sander switch to the ON position.
User’s Manual – AREBOS Drywall Sander LARGE BRUSH • • • A large brush surrounds the abrasive pad. It serves two purposes: (1) It extends below the surface of the abrasive pad so that it is in contact with the work surface first. This positions the sanding head parallel to the work surface before the abrasive comes into contact with the working surface, preventing the abrasive from causing scratches. (2) It also helps contain the drywall dust until the vacuum cleaner pulls it away.
User’s Manual – AREBOS Drywall Sander Technical Specifications Power Voltage supply Frequency Speed Protection class Disc Diameter Sound pressure level Lpa Sound power level Lwa 750W 230-240V 50Hz 1000-2100 rpm II Ø225mm 83,1 dB(A) ；KpA = 3 dB(A) 94,1 dB(A)； KwA = 3 dB(A) • The impact of noise can cause damage to hearing. Overall oscillation value determined according to EN 60745. Vibration emission value 1.171m/ s², Uncertainty K = 1.
User’s Manual – AREBOS Drywall Sander Disposal Instruction Disposal of the packaging • Please make reference to the guidelines and standards for appropriate disposal of the packaging valid in your region. In part, the package may consist of plastic bags - watch this respect, with special care to ensure that this is not out of the reach of children.
User’s Manual – AREBOS Drywall Sander EU Declaration of Conformity We, Canbolat Vertriebs GmbH, Gneisenaustraße 10-11, 97074 Würzburg, Germany, Hereby declare that the product named below, seen its design and construction as well as according to our sales, has been complied with the relevant and basic health and safety EU-requirements. Name of the product: AREBOS Drywall Sander Model Nr.: AR-HE-LS700C8 Art. Nr.
