Datasheet

MKR2UNO ADAPTER

Code: TSX00005

Simply mount your MKR1000 to this new adapter and plug in any of your UNO

shields!

The MKR2UNO Adapter allows you to turn your Arduino UNO form factor based project into a MKR based

one without too much effort! You can so upgrade your project with a powerful board with integrated LiPo

battery charger.

PAGE 1
MKR2UNO ADAPTER Code: TSX00005 Simply mount your MKR1000 to this new adapter and plug in any of your UNO shields! The MKR2UNO Adapter allows you to turn your Arduino UNO form factor based project into a MKR based one without too much effort! You can so upgrade your project with a powerful board with integrated LiPo battery charger.
PAGE 2
TECH SPECS Operating Voltage Input Voltage (recommended) Input Voltage (limit) Analog Input Pins Analog Output Pins Digital I/O Pins DC Current for 3.3V Pin DC Current for 5V Pin Length Width Weight 3.3V 7-12V 6-16V 6 1 14 700 mA 700 mA 68.6 mm 53.
PAGE 3
OSH: Schematics MKR2UNO is open-source hardware! You can build your own board using the following files: EAGLE FILES IN .ZIPSCHEMATICS IN .PDF Please keep in mind that the MKR2UNO is just a form factor adapter and so is NOT present any voltage translation. Be careful before connecting a shield since shield without IOREF level shifting capability may not work properly.
PAGE 4
If you want to use the Arduino MKRZero and the Arduino WIFi shield 101 read the Arduino WIFi shield 101 reference to change module pins. Unlike the Arduino UNO, the MKR2UNO Adapter do NOT have I2C signals on A4 and A5 and SPI on pins 11, 12 and 13.