User manual

10 User Manual
Arduino Materia 101
ASSEMBLING THE
REELCARRIER
For assembling the reel-carrier please
see chapter 3, figures 9, 10 and 11 of
the manual Assembly, recalling that
the wire must carry out unhindered
and in the direction of the extruder.
UNBLOCKING THE EXTRUDER
To avoid damage during transport, the
blocking of the extruder is secured with
clamps. The clamps must be carefully cut
and removed to allow the extruder to move
freely. DO NOT feed the printer until you
have done this step otherwise you will
damage the motors and mechanics.
Remove all the packaging
inside the machine.