Datasheet

• 5 resistors (560 ohm),
• 5 resistors (1 kilohm),
• 5 resistors (4.7 kilohm),
• 20 resistors (10 kilohm),
• 5 resistors (1 megohm),
• 5 resistors (10 megohm)
Please note, don't connect 9V to the board, as it will be damaged.
You can use the 9v Battery strip to supply an external component.
Arduino MKR1000 has been designed to offer a practical and cost effective solution for makers seeking to
add Wi-Fi connectivity to their projects with minimal previous experience in networking.It is based on the
Atmel ATSAMW25 SoC (System on Chip), that is part of the SmartConnect family of Atmel Wireless devices,
specifically designed for IoT projects and devices.
The ATSAMW25 is composed of three main blocks:
 SAMD21 Cortex-M0+ 32bit low power ARM MCU
 WINC1500 low power 2.4GHz IEEE® 802.11 b/g/n Wi-Fi
 ECC508 CryptoAuthentication