Reference Manual

Arduino® Portenta Vision Shield LoRa®
7 / 18 Arduino® Portenta Vision Shield LoRa® Modified: 16/08/2022
Bottom view
Ref. Description Ref. Description
U1 Voltage Regulator J3
LoRa® Radio Antenna U.FL Connector
(ASX00026 Only)
U2,U3 ST MP34DT06JTR Digital Microphone J7 Ethernet Connector (ASX00021 Only)
M1
Murata CMWX1ZZABZ LoRa® Module
(ASX00026 Only)
J9 Micro SD Card Connector
J1, J2 High Density Connectors CN1 JTAG Connector
3.2 Camera Module
The Himax HM-01B0 Module is a very low power camera with 324x324 resolution and a maximum of 60FPS
depending on the operating mode. Video data is transferred over a configurable 8-bit interconnect with support for
frame and line synchronization. The module delivered with the Vision Shield is the monochrome version.
Configuration is achieved via a I2C connection with the Portenta H7.
HM-01B0 offers very low power image acquisition and provides the possibility to perform motion detection without
main processor interaction. “Always-on” operation provides the ability to turn on the main processor when
movement is detected with minimal power consumption.