Datasheet

More than 700 components and parts:
 Six Arduino 101 boards: One of the most powerful Arduino
boards for Education, it includes wireless communication
(Bluetooth) and an integrated IMU (Inertial Measurement Unit).
They are programmable, able to read inputs (e.g., light on a
sensor) and capable to control outputs (e.g., activating a motor).
 Six Arduino Education shields: Add-on boards that connect to
the Arduino 101 and Uno boards to extend their functionality. The
Education Shield is a custom-made shield designed by Arduino
Education specially tailored for educational purposes to enable
quick and easy learning while building projects.
 More than 10 mini breadboards: Used to make circuits easier to
build. They can be either attached on top of the Education Shield
or used separately to connect other components.
 Set of electronic components: Used to create interactive
electronic circuits, includes resistors, potentiometers, LEDs, push
buttons, capacitors, and diodes.
 Set of plug and play modules: Sensors and actuators with all
the necessary components on-board so they can be connected to
the Education shield board directly. Modules include a joystick,
light and tilt sensors, and an infrared array.
 Set of sensors and actuators: Sensors include light, knock,
touch / capacitive, and infrared. Actuators include, standard and
continuous servo motors.
 Set of batteries: Includes both 9V and 1.5V batteries, and 4-slot
and 8-slot battery holders.
 Media and storage: Includes webcam, SD card and a speaker.
The Education Shield features an SD card reader and an audio
connector.
 Set of cables: Includes all the cables needed such as USB
cables, jumper wires, module cables, battery snaps, alligator
cables and single core wires.
 MDF parts: Laser-cut MDF parts can be used for 10 different
projects.
 Storage and sorting boxes: Electronic components can be
sorted inside boxes based on their functions and sizes. After MDF
parts are removed from their frames, they can be stored in the
resealable storage bags to keep them organized for later use.
The sorting box with dividers can be used to organize small
components.