Data Sheet

ManualsBrandsArduino ManualsDevelopment ToolsBoard NANO RP2040 CONNECT Nano

Arduino®NanoRP2040Connect

ProductReferenceManual

SKU:ABX00053

Description

ThefeaturepackedArduino®NanoRP2040

ConnectbringsthenewRaspberryPiRP2040

microcontrollertotheNanoformfactor.Makethe

mostofthedualcore32-bitArm®Cortex®-M0+

tomakeInternetofThingsprojectswithBluetooth

andWiFiconnectivitythankstotheU-blox®Nina

W102module.Diveintoreal-worldprojectswith

theonboardaccelerometer,gyroscope,RGBLED

andmicrophone.DeveloprobustembeddedAI

solutionswithminimaleffortusingtheArduino®

NanoRP2040Connect!

TargetAreas

InternetofThings(IoT),machinelearning,prototyping,

Features

RaspberryPiRP2040Micrcontroller

133MHz32bitDualCoreArm®Cortex®-M0+

264kBon-chipSRAM

DirectMemoryAccess(DMA)controller

Supportforupto16MBofoff-chipFlashmemoryviadedicatedQSPIbus

USB1.1controllerandPHY,withhostanddevicesupport

8PIOstatemachines

ProgrammableIO(PIO)forextendedperipheralsupport

4channelADCwithinternaltemperaturesensor,0.5MSa/s,12-bitconversion

SWDDebugging

2on-chipPLLstogenerateUSBandcoreclock

40nmprocessnode

Multiplelowpowermodesupport

USB1.1Host/Device

InternalVoltageRegulatortosupplythecorevoltage

AdvancedHigh-performanceBus(AHB)/AdvancedPeripheralBus(APB)

Summary of content (19 pages)

PAGE 1
Arduino® Nano RP2040 Connect Product Reference Manual SKU: ABX00053 Description The feature packed Arduino® Nano RP2040 Connect brings the new Raspberry Pi RP2040 microcontroller to the Nano form factor. Make the most of the dual core 32-bit Arm® Cortex®-M0+ to make Internet of Things projects with Bluetooth and WiFi connectivity thanks to the U-blox® Nina W102 module. Dive into real-world projects with the onboard accelerometer, gyroscope, RGB LED and microphone.
PAGE 2
Arduino® Nano RP2040 Connect U-blox® Nina W102 WiFi/Bluetooth Module 240MHz 32bit Dual Core Xtensa LX6 520kB on-chip SRAM 448 Kbyte ROM for booting and core functions 16 Mbit FLASH for code storage including hardware encryption to protect programs and data 1 kbit EFUSE (non- erasable memory) for MAC addresses, module configuration, FlashEncryption, and Chip-ID IEEE 802.11b/g/n single-band 2.4 GHz WiFi operation Bluetooth 4.
PAGE 3
Arduino® Nano RP2040 Connect Microchip® ATECC608A Crypto Cryptographic Co-Processor with Secure Hardware-Based Key Storage I2C, SWI Hardware Support for Symmetric Algorithms: SHA-256 & HMAC Hash including off-chip context save/restore AES-128: Encrypt/Decrypt, Galois Field Multiply for GCM Internal High-Quality NIST SP 800-90A/B/C Random Number Generator (RNG) Secure Boot Support: Full ECDSA code signature validation, optional stored digest/signature Optional communication key disablement prior to secure bo
PAGE 4
Arduino® Nano RP2040 Connect Contents 1 The board 6 1.1 Application examples 6 1.2 Accessories 6 1.3 Related products 6 2 Ratings 6 2.1 Recommended operating conditions 6 2.2 Power consumption 7 3 Functional overview 7 3.1 Block Diagram 7 3.2 Board Topology 8 3.3 Processor 10 3.4 WiFi/Bluetooth connectivity 10 3.5 6-axis IMU 10 3.6 External memory 10 3.7 Cryptography 10 3.8 Microphone 11 3.9 RGB LED 11 3.10 Power Tree 11 4 Board Operation 13 4.
PAGE 5
Arduino® Nano RP2040 Connect 7.1 Declaration of Conformity CE DoC (EU) 16 7.2 Declaration of Conformity to EU RoHS & REACH 211 01/19/2021 16 7.3 Conflict Minerals Declaration 17 7.4 FCC Caution 17 8 Company information 19 9 Reference Documentation 19 10 Revision History 19 5 / 19 Arduino® Nano RP2040 Connect / Rev.
PAGE 6
Arduino® Nano RP2040 Connect 1 The board 1.1 Application examples The Arduino® Nano RP2040 Connect can be adapted to a wide range of use cases thanks to the powerful microprocessor, range of onboard sensors and Nano form factor. Possible applications include: Edge Computing: Make use of the fast and high RAM microprocessor to run TinyML for anomaly detection, cough detection, gesture analysis and more.
PAGE 7
Arduino® Nano RP2040 Connect Symbol Description Min Typ Max Unit VIN Input voltage from VIN pad 4 5 20 V VUSB Input voltage from USB connector 4.75 5 5.25 V V3V3 3.3V output to user application 3.25 3.3 3.35 V I3V3 3.3V output current (including onboard IC) - - 800 mA VIH Input high-level voltage 2.31 - 3.3 V VIL Input low-level voltage 0 - 0.99 V IOH Max Current at VDD-0.4 V, output set high 8 mA IOL Max Current at VSS+0.
PAGE 8
Arduino® Nano RP2040 Connect VUSB VIN MP2322 Regulator 3V3 PDM MP34DT06JTR MEMS Mic RP2040 USB DATA I2C ECC608 Authenticator LSM6DSOXTR 6-axis IMU SPI QSPI 16MB Flash UART NINA W102 WiFi/BT RGB LED Nano RP2040 Connect Powe r Microcontrolle r LE D Data Communicatio n Internal Part s Softwar e Block Diagram of Arduino Nano RP2040 Connect 3.2 Board Topology Front View 8 / 19 Arduino® Nano RP2040 Connect / Rev.
PAGE 9
Arduino® Nano RP2040 Connect Front View of Arduino Nano RP2040 Connect Topology Ref. Description Ref. Description U1 Raspberry Pi RP2040 Microcontroller U2 Ublox NINA-W102-00B WiFi/Bluetooth Module U3 N/A U4 ATECC608A-MAHDA-T Crypto IC U5 AT25SF128A-MHB-T 16MB Flash IC U6 MP2322GQH Step-Down Buck Regulator U7 DSC6111HI2B-012.
PAGE 10
Arduino® Nano RP2040 Connect 3.3 Processor The processor is based upon the new Raspberry Pi RP2040 silicon (U1). This microcontroller provides opportunities for low-power Internet of Things (IoT) development and embedded machine learning. Two symmetric Arm® Cortex®-M0+ clocked at 133MHz provide computation power for embedded machine learning and parallel processing with low power consumption. Six independant banks of 264 KB SRAM and 2MB are provided.
PAGE 11
Arduino® Nano RP2040 Connect 3.8 Microphone The MP34DT06J microphone is connected via a PDM interface to the RP2040. The digital MEMS microphone is omnidirectional and operate via a capacitive sensing element with a high (64 dB) signal to noise ratio. The sensing element, capable of detecting acoustic waves, is manufactured using a specialized silicon micromachining process dedicated to produce audio sensors. 3.9 RGB LED The RGB LED (DL3) is a common anode LED that is connected to the Nina W102 module.
PAGE 12
Arduino® Nano RP2040 Connect Power Tree of Arduino Nano RP2040 Connect Topology The Arduino Nano RP2040 Connect can be powered by either the Micro USB port (J1) or alternatively via VIN on JP2. An onboard buck converter provides 3V3 to the RP2040 microcontroller and all other peripherals. Additionally, the RP2040 also has an internal 1V8 regulator. 12 / 19 Arduino® Nano RP2040 Connect / Rev.
PAGE 13
Arduino® Nano RP2040 Connect 4 Board Operation 4.1 Getting started - IDE If you want to program your Arduino® Nano RP2040 Connect while offline you need to install the Arduino® Desktop IDE [1] To connect the Arduino® Edge control to your computer, you’ll need a micro USB cable. This also provides power to the board, as indicated by the LED. 4.
PAGE 14
Arduino® Nano RP2040 Connect 5 Connector Pinouts 5.1 J1 Micro USB Pin Function Type Description 1 VBUS Power 5V USB Power 2 D- Differential USB differential data - 3 D+ Differential USB differential data + 4 ID Digital Unused 5 GND Power Ground 5.
PAGE 15
Arduino® Nano RP2040 Connect Pin Function Type Description 1 D13 Digital Digital Pin 13 2 3.3V Power 3.
PAGE 16
Arduino® Nano RP2040 Connect 6 Mechanical Information Mechanical dimensions of Arduino Nano RP2040 Connect 7 Certifications 7.1 Declaration of Conformity CE DoC (EU) We declare under our sole responsibility that the products above are in conformity with the essential requirements of the following EU Directives and therefore qualify for free movement within markets comprising the European Union (EU) and European Economic Area (EEA). 7.
PAGE 17
Arduino® Nano RP2040 Connect Substance Maximum Limit (ppm) Lead (Pb) 1000 Cadmium (Cd) 100 Mercury (Hg) 1000 Hexavalent Chromium (Cr6+) 1000 Poly Brominated Biphenyls (PBB) 1000 Poly Brominated Diphenyl ethers (PBDE) 1000 Bis(2-Ethylhexyl} phthalate (DEHP) 1000 Benzyl butyl phthalate (BBP) 1000 Dibutyl phthalate (DBP) 1000 Diisobutyl phthalate (DIBP) 1000 Exemptions : No exemptions are claimed.
PAGE 18
Arduino® Nano RP2040 Connect FCC RF Radiation Exposure Statement: 1. This Transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. 2. This equipment complies with RF radiation exposure limits set forth for an uncontrolled environment. 3. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.
PAGE 19
Arduino® Nano RP2040 Connect 8 Company information Company name Arduino S.r.l. Company Address Via Ferruccio Pelli 14, 6900 Lugano, TI (Ticino), Switzerland 9 Reference Documentation Ref Link Arduino IDE (Desktop) https://www.arduino.cc/en/Main/Software Arduino IDE (Cloud) https://create.arduino.cc/editor Cloud IDE Getting Started https://create.arduino.cc/projecthub/Arduino_Genuino/getting-startedwith-arduino-web-editor-4b3e4a Arduino Website https://www.arduino.