Arduino® Portenta H7 Product Reference Manual SKU: ABX00042 Description Portenta H7 family runs high level codes along with real time tasks thanks to the two processors that makes it possible to run tasks in parallel. For example, it is possible to execute Arduino compiled code along with MicroPython one simultaneously, and have both cores to communicate with one another.
Arduino® Portenta H7 Name Portenta H7 SKU ABX00042 Preview Security ATECC608 NXP SE050C2 Connectivity Ethernet PHY / Wi-Fi® / Bluetooth® Low Energy (BLE 5 via Cordio stack, BLE 4.2 via Arduino Stack) Memory 8 MB / 16 MB Power Li-Po Single Cell 3.
Arduino® Portenta H7 CONTENTS 1 Features 4 2 Ratings 8 2.1 Recommended Operating Conditions 8 2.2 Power Consumption 8 2.3 Block Diagram 9 3 Connector Pinouts 9 3.1 USB-C 10 3.2 High Density Connector 10 3.3 Wake Up Signals/External Relay Commands 11 4 Application Examples 13 4.1 Accessories 13 5 Functional Overview 13 5.1 Board Topology 13 5.2 Power Tree 14 6 Mechanical Information 15 6.1 Board Outline 15 6.2 Mounting Holes 15 6.
Arduino® Portenta H7 1 Features Component Details ST STM32H747XI Processor Dual Core Arm® Cortex®-M7 core at up to 480 MHz with double-precision FPU and 16K data + 16K instruction L1 cache Arm® 32-bit Cortex®-M4 core at up to 240 MHz with FPU, Adaptive real-time accelerator (ART AcceleratorTM) Flash Memory 2Mbytes of Flash Memory with readwhile-write support 1 Mbyte of RAM Dual mode Quad-SPI memory interface running up to 133 MHz CRC calculation unit Security ROP, PC-ROP, active tamper 3 separate po
Arduino® Portenta H7 Component Details Up to 35 communication peripherals 4× I2Cs FM+ interfaces (SMBus/PMBus) 4× USARTs/4x UARTs (ISO7816 interface, LIN, IrDA, up to 12.
Arduino® Portenta H7 Component Details 2× 32-bit timers with up to 4 IC/OC/PWM or pulse counter and quadrature (incremental) encoder input (up to 240 MHz) 2× 16-bit advanced motor control timers (up to 240 MHz) 10× 16-bit general-purpose timers (up to 240 MHz) 5× 16-bit low-power timers (up to 240 MHz) 4× watchdogs (independent and window) 2× SysTick timers RTC with sub-second accuracy and hardware calendar True random number generators (3 oscillators each) 96-bit unique ID External memories USB-C SDRAM
Arduino® Portenta H7 Component Details ECDH: FIPS SP800-56A Elliptic Curve Diffie-Hellman NIST standard P256 elliptic curve support Hardware support for symmetric algorithms SHA-256 & HMAC hash including off-chip context save/restore AES-128: encrypt/decrypt, galois field multiply for GCM Networking key management support Turnkey PRF/HKDF calculation for TLS 1.2 & 1.
Arduino® Portenta H7 Component Details up to 100 Mio write cycles / 25 years MKR compatible header 7x PWM channels 7x ADC channels 1x SPI 1x UART 1x I2C ESLOV Connector NXP PF1550 Programmable PMIC I2C port with automatic device enumeration Dynamic voltage scaling Programmable independent 1A voltage output to carrier board Programmable I/O voltage Integrated Li-Po/Li-lon Battery charger 2 Ratings 2.
Arduino® Portenta H7 2.
Arduino® Portenta H7 3.1 USB-C Pin Description Pin Description GND Cable Ground TX1 +/TX2 +/- High speed data path (TX for USB, or RX for DP Alt Mode) VBUS Cable bus power RX1 +/- High speed data path (TX for RX2 +/- USB, or RX for DP Alt Mode) SBU1 SBU2 D+/D- USB 2.0 Interface CC1 CC2 For sideband use (Not used for USB) Plug configuration detection * One becomes VCONN for cable or adaptor power * CC is used for USB-PD communication 3.
Arduino® Portenta H7 Pin Description Pin Description ETH High Density Connector CAN High Density Connector USB High Density Connector DSI High Density Connector CAM High Density Connector DMIC High Density Connector I2C0 I2C1 I2C2I2S High Density Connector VSYS VIN V-SDCARDVCC VBUS USB ADCVREF Power GND Ground PWM High Density Connector GPIO High Density Connector SPI1 High Density Connector SWDIOSWCK SWO High Density Connector ADC High Density Connector SDC High Density Con
Arduino® Portenta H7 MKR format Headers pinout 12 / 21 Arduino® Portenta H7 Modified: 25/11/2022
Arduino® Portenta H7 4 Application Examples Due to the dual core processing, the Portenta supports a wide array of applications. 4.1 Accessories Portenta Vision shield USB 2.0 Cable Type A/B Portenta Breakout Board 5 Functional Overview 5.1 Board Topology Depending on the variant, some of the components does not apply. The image below originates from the H7 form factor, see what components are applied on your board: Board Topology Ref. Description Ref.
Arduino® Portenta H7 Ref. Description Ref. Description U9 Wifi/BT Module J5 ESLOV Connector J6 Connector micro UFL 5.
Arduino® Portenta H7 6 Mechanical Information 6.1 Board Outline Board outline 6.
Arduino® Portenta H7 6.
Arduino® Portenta H7 7 Certifications Certification Details EN 301489-1, EN 301489-17, CE (EU) EN 300328, EN 62368-1, EN 62311 WEEE (EU) Yes 2011/65/(EU) RoHS (EU) 2015/863/(EU) REACH (EU) Yes UKCA (UK) Yes RCM (RCM) Yes ID. FCC (US) Radio: Part 15-247 MPE: Part 2. 1091 ID.
Arduino® Portenta H7 7.1 Declaration of Conformity CE DoC (EU) We declare under our sole responsibility that the products above are in conformity with the essential requirements of the following EU Directives and therefore qualify for free movement within markets comprising the European Union (EU) and European Economic Area (EEA). 7.
Arduino® Portenta H7 7.3 Conflict Minerals Declaration As a global supplier of electronic and electrical components, Arduino is aware of our obligations with regards to laws and regulations regarding Conflict Minerals, specifically the Dodd-Frank Wall Street Reform and Consumer Protection Act, Section 1502. Arduino does not directly source or process conflict minerals such as Tin, Tantalum, Tungsten, or Gold.
Arduino® Portenta H7 French: Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux appareils radio exempts de licence. L’exploitation est autorisée aux deux conditions suivantes : (1) l’ appareil nedoit pas produire de brouillage (2) l’utilisateur de l’appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d’en compromettre le fonctionnement.
Arduino® Portenta H7 9 Company Information Company name Arduino S.r.l. Company Address Via Andrea Appiani, 25 - 20900 MONZA（Italy） 10 Reference Documentation Reference Link Arduino IDE (Desktop) https://www.arduino.
