Datasheet

● Robotics controller
● Mission-critical devices
● Dedicated stationary computer
● High-speed booting computation (ms)
A NEW STANDARD FOR PINOUTS
The Portenta family adds two 80 pin high density connectors at the bottom of the board. This ensures scalability
for a wide range of applications by simply upgrading your Portenta board to the one suiting your needs.
Main Features
DUAL CORE - The PH7 has two processors in one, run parallel tasks in different languages
SELECT ENCRYPTION - Choose between two vendors for the crypto-chip that better suits your case
USB-C - Power your board, connect it to a display, or get it to work in OTG mode
MEMORY RANGE - Select the right amount and type of memory for your application
MULTIPLE OPTIONS ON ONE BOARD
Order the default Portenta H7 using the codename ‘Arduino Portenta H7-15EUNWAD’. The board comes
with:
● STM32H747 dual-core processor with graphics engine
● 8MB SDRAM
● 16MB NOR Flash
● 10/100 Ethernet Phy
● USB HS
● NXP SE050C2 Crypto
● WiFi/BT Module
● Ceramic Antenna
● DisplayPort over USB-C
Tailor the hardware to your solution
If you need more memory, Portenta H7 can host up to 64 MByte of SDRAM, and 128 MByte of QSPI
Flash. Order it with an external UFL connector for adding a higher-gain antenna to the board. Decide
between crypto-chips from Microchip® and NXP - the ATECC608A or the SE050C2 crypto chips.