Datasheet

31/5/2019 https://store.arduino.cc/usa/datasheet/index/index/url_key/nano-33-iot-with-headers-reseller/
https://store.arduino.cc/usa/datasheet/index/index/url_key/nano-33-iot-with-headers-reseller/ 1/3
Arduino Nano 33 IoT with headers
The ease of use of a Nano board with the addition of secure IoT and BT connectivity.
SKU: ABX00032
Country of origin: IT
Taric: 85235210
EECN: 5A992.c
HTS: 8542310001
Overview
This small, robust and powerful board has WiFi and Bluetooth connectivity that combined with its low power architecture makes it a practical and cost effective
solution for your connected projects.
Arduino Nanof 33 IoT is fully compatible with the Arduino IoT Cloud and supports full TLS secure transport: the ATECC608A cryptochip stores the cryptographic
keys in hardware, offering a very high level of security for this class of products. The integration with the Arduino IoT Cloud offers also a very efficient way of setting
up online dashboards with little coding and minimal effort .
In the same iconic size of the Arduino NANO, the Arduino Nano 33 IoT hosts an Arm Cortex-M0+ SAMD21 processor, a WiFi and Bluetooth module based on
ESP32, a 6 axis Inertial Measurement Unit (IMU) and a crypto chip which can securely store certificates and pre shared keys.
The board can either be used in a breadboard (when mounting pin headers), or as a SMT module, directly soldering it via the castellated pads.
With headers mounted.
Tech Specs
This board is based on the SAMD21G18A microcontroller.
Clock up to 48MHz
Flash 256KB
SRAM 32KB