Datasheet

31/5/2019 https://store.arduino.cc/usa/datasheet/index/index/url_key/nano-33-ble-sense-reseller/
https://store.arduino.cc/usa/datasheet/index/index/url_key/nano-33-ble-sense-reseller/ 1/3
Arduino Nano 33 BLE Sense
Small, powerful, BT connected and with all the sensors you may need to design innovative applications.
SKU: ABX00031
Country of origin: IT
Taric: 85235210
EECN: 5A992.c
HTS: 8542310001
Overview
This compact and reliable Nano board is built around the NINA B306 module for BLE and Bluetooth 5 communication; the module is based on Nordic nRF52480
processor that contains a powerful Cortex M4F and the board has a rich set of sensors that allow the creation of innovative and highly interactive designs.
Its architecture, fully compatible with Arduino IDE Online and Offline, has a 9 axis Inertial Measurement Unit (IMU), temperature, pressure, humidity, light, color and
even gestures sensors that are managed through our specialized libraries. Its reduced power consumption, compared to other same size boards, together with the
NANO form factor opens up a wide range of applications.
This allows the design of wearable devices and gesture based projects that need to communicate to other devices at a close range. Arduino Nano 33 BLE Sense is
ideal for interactive automation projects thanks to the multiprotocol BT 5.0 radio.
Tech Specs
This board is based on the nRF52480 microcontroller.
Clock 64MHz
Flash 1MB
RAM 256KB
Please note: Arduino Nano 33 BLE only supports 3.3V I/Os and is NOT 5V tolerant so please make sure you are not directly connecting 5V signals to this board or
it will be damaged. Also, as opposed to Arduino Nano boards that support 5V operation, the 5V pin does NOT supply voltage but is rather connected, through a
jumper, to the USB power input.