Datasheet

The MKR WIFI 1010 is a significant improvement
on the MKR 1000 WIFI. It's equipped with an
ESP32 module made by U-BLOX. This board aims
to speed up and simplify the prototyping of WiFi
based IoT applications thanks to the flexibility of
the ESP32 module and its low power
consumption.
The MKR WIFI 1010 includes 32-bit computational
power, the usual rich set of I/O interfaces, and
low power Wi-Fi with a Cryptochip for secure
communication using SHA-256 encryption. Plus,
it oers ease of use Arduino Soware (IDE) for
code development and programming. All of these
features make this board the preferred choice for
the emerging IoT baery-powered projects in a
compact form. Its USB port can be used to
supply power (5V) to the board. It has a Li-Po
charging circuit that allows the Arduino MKR WIFI
1010 to run on baery power or an external 5 volt
source, charging the Li-Po baery while running
on external power.
ARDUINO MICROCONTROLLER
Microcontroller SAMD21
Architecture ARM Cortex-M0+ 32bit
Operating Voltage 3.3V
Flash Memory 256 KB
SRAM 32 KB
Clock Speed 32.768 kHz (RTC), 48 MHz
DC Current per I/O Pin 3 mA (I/O Pins)
GENERAL
Input Voltage 5 V
Digital I/O Pins
Interfaces
22
I2C, I2S, SPI, UART
PWM Output 12
Analog I/O Pins 7/1
Power Consumption 93 mA,
30mA (low power)
Weight 15.3 g
Product Code ABX00023
MKR WIFI 1010