Datasheet

With the MKR VIDOR 4000 you can configure it
the way you want; you can essentially create
your own controller board. It comes loaded
with hardware and potential: an 8 MB SDRAM; a
2 MB QSPI Flash chip — 1 MB allocated for user
applications; a Micro HDMI connector; an MIPI
camera connector; and Wifi & BLE powered by
U-BLOX NINA W10 Series. It also includes the
classic MKR interface on which all pins are
driven both by SAMD21 and FPGA. Plus, it has a
Mini PCI Express connector with up to 25 user
programmable pins.
The FPGA contains 16K Logic Elements, 504 KB
of embedded RAM, and 56 18x18 bit HW
multipliers for high-speed DSP. Each pin can
toggle at over 150 MHz and can be configured
for functions such as UARTs, (Q)SPI, high
resolution/high frequency PWM, quadrature
encoder, I2C, I2S, Sigma Delta DAC, etc.
ARDUINO MICROCONTROLLER
Microcontroller SAMD21
Architecture ARM Cortex-M0+ 32bit
plus Cyclone 10
Operating Voltage 3.3V
Flash Memory 256 KB
SRAM 32 KB
Clock Speed 48 MHz
DC Current per I/O Pin 3 mA (I/O Pins)
GENERAL
Peripherals Programmable Cyclone
10 accelerator w/ 8MB RAM
Connectivity Wi-Fi w/ NINA W102
Digital I/O Pins
Interfaces
20 (headers) +32 (mPCI)
I2C, SPI, UART, mPCI express
MIPI Camera, miniHDMI
PWM Output 12 (D21)/22 (Cyclone 10)
Analog I/O Pins 7/1
Power Consumption < 100 mA < 10 mA
(low power, Wi-Fi off)
Weight 9 g
Product Code ABX00022
MKR VIDOR 4000