Datasheet

Add this board to a
device and you'll be able to
connect it to a WiFi network, using its secure
ECC608 crypto chip accelerator. The Arduino
Uno WiF incorporates a brand new 8-bit
microprocessor from Microchip and has an
onboard IMU (Inertial Measurement Unit).
The Wi-Fi Module is a self-contained SoC with
integrated TCP/IP protocol stack that can
provide access to a Wi-Fi network, or act as an
access point.
The Arduino Uno WiFi has 14 digital
input/output pins—6 can be used as PWM
outputs—6 analog inputs, a 16 MHz ceramic
resonator, a USB connection, a power jack, an
ICSP header, and a reset button. Simply
connect it to a computer with a USB cable or
power it with an AC adapter or battery to get
started.
ARDUINO MICROCONTROLLER
Microcontroller ATMega 4809
Architecture AVR
Operating Voltage 5V
Flash Memory 48 KB
SRAM 6 KB
EEPROM 256 byte
DC Current per I/O Pin 40 mA (I/O Pins)
GENERAL
Input Voltage 7-12 V
Digital I/O Pins
Interfaces
20
I2C, SPI, UART
PWM Output 5
Analog I/O Pins 6/0
Weight 8.9 g
Product Code ABX00021
UNO WIFI REV2