Data Sheet

ManualsBrandsArduino ManualsArduino ShieldsArduino TFT LCD Screen and SD Card Reader

Huanan Electronic Technology Co.,Ltd

4/F, Block B, Anhongji Technology Industrial Estate, Min Zhi Street, Longhua District Shenzhen

City, GuangDong Province, China

TEL: +86 755 -33168098

FAX: +86 755 -23272656

SPECIFICATION

FOR

LCD MODULE

MODULE NO.: HTF0177SN-01

DOC.REVISION V1

Customer Approval:

SIGNATURE DATE

PREPARED BY

(RD ENGINEER)

2012-06-24

PREPARED BY

(QA ENGINEER)

CHECKED BY

APPROVED BY

Summary of content (13 pages)

PAGE 1
Huanan Electronic Technology Co.,Ltd 4/F, Block B, Anhongji Technology Industrial Estate, Min Zhi Street, Longhua District Shenzhen City, GuangDong Province, China TEL: +86 755 -33168098 FAX: +86 755 -23272656 SPECIFICATION FOR LCD MODULE MODULE NO.: HTF0177SN-01 DOC.
PAGE 2
MODEL No:HTF0177SN-01 History of Versions and Modifications Version Modifications V1.
PAGE 3
MODELNo:HTF0177SN-01 CONTENTS NO.
PAGE 4
MODEL No:HTF0177SN-01 1.General Specifications Item Main LCD Unit LCD Type 1.77 TFT LCD - Display color 262K LCD Duty 1/160 - LCD Bias - - Viewing Direction 12:00 O Clock Viewing Area(W H) - Active Area(W H) 28.032X35.04 Number of Dots 128(R,G,B) 160 mm Dot Size(W H) - mm Dot Pitch(W H) Controller mm mm mm ILI9163 VDD 2.7~3.
PAGE 5
MODEL No:H7) 61 01 2XWOLQH 'UDZLQJ 3$*(
PAGE 6
MODEL No:HTF0177SN-01 3. Absolute Maximum Raings ITEM SYMBOL MIN. MAX. UNIT Operating Ambient Temperature TOP -20 +70 C Operating Ambient Humidity HOP 10 90 % (RH) Storage Temperature TSTG -30 +80 C Storage Humidity HSTG 10 90 % (RH) NOTE Note 1. The absolute maximum ratings are the values that must not be exceeded at any time for this product. It is not allowed for any of these ratings to be exceeded.
PAGE 7
MODEL No: 07) 61 10 4. LED backlight specification and Interface Signal 4.
PAGE 8
MODEL No:HTF0177SN-01 4.2 Interface Signal PIN. SYMBOL No. Function 1 NC No connection 2 GND System Ground 3 LEDK Backlight LED1 Cathode. 4 LEDA Backlight LED Anode. 5 GND System Ground RESET Reset Signal pin (“Low” is enable) 6 7 RS Command/display data select pin 8 SDA Serial data input 9 SCK Serial Clock. 10 VCC Power supply 11 IOVC Power supply forthe I/Ocircuit.
PAGE 9
MODEL No:HTF0177SN-01 5. Optical Characteristics ITEM SYMBOL CONDITION MIN. Transmittance(%) T Luminance L (180) Luminance Uniformity L (80) TYP. (200) CR (300) --- (61%) Tr Color Coordinate = Tf Upper Lower Left Right R G B Note 1. Ambient condition Note 2. Measure device 0 CR W 25 REMARK 10 x y x y x y x Y = 2 60 10%RH BM-5A (TOPCON) 0 2 Note 4 (10) ms (15) (60) (55) (50) (50) (0.313) (0.329) (0.6457) (0.3391) (0.3438) (0.6012) (0.1476) (0.
PAGE 10
MODEL No:HTF0177SN-01 Note 4. Definition of Contrast Ratio CR = White Luminance (ON) / Black Luminance (OFF) Note 5. Definition of response time 90% amplitudes. The response time is defined as the time interval between the 10% and Note 6.
PAGE 11
MODEL No:HTF0177SN-01 6.
PAGE 12
MODEL No:HTF0177SN-01 7. Precautions for Use of LCD Modules 7.1 Handling Precautions 7.1.1 The display panel is made of glass. Do not subject it to a mechanical shock by dropping it from a high place, etc. 7.1.2 If the display panel is damaged and the liquid crystal substance inside it leaks out, be sure not to get any in your mouth, if the substance comes into contact with your skin or clothes, promptly wash it off using soap and water. 7.1.
PAGE 13
MODEL No:HTF0177SN-01 d. The LCD Module is coated with a film to protect the display surface. Be care when peeling off this protective film since static electricity may be generated. 7.2 Storage precautions 7.2.1 When storing the LCD modules, avoid exposure to direct sunlight or to the light of fluorescent lamps. 7.2.2 The LCD modules should be stored under the storage temperature range.