User Guide

ArduCAM-Mini-5MP-Plus Camera User Guide
www.ArduCAM.com
3
3 Features
 5MP image sensor OV5642
 M12/CS mount replaceable lens
 I2C interface for the sensor configuration
 SPI interface for camera commands and data stream
 Support external hardware trigger input
 Support JPEG compression mode, single and multiple shoot mode, short movie recording,
one time capture multiple read operation, burst read operation, low power mode and etc.
 All IO ports are 5V/3.3V tolerant
 Well mated with standard Arduino boards
 Provide open source code library for Arduino, ESP8266, Raspberry Pi, etc
 Small form of factor
4 Key Specifications
 Power supply 3.3V~5V
 Active array size: 2592x1944
 SPI speed: Max 8MHz
 Shutter: rolling shutter
 Frame buffer: 8MByte
 Pixel Size: 1.4µm x 1.4µm
 Default M12 Lens: 90°
 Resolution support:
 Size: 34 x 24 mm
5MP, 1080p, 720p, VGA, QVGA
 Weight: 20g
 Format support: RAW, YUV, RGB, JPEG
 Temperature: -10℃～+55℃
5 Pin Definition
Table 1 ArduCAM-Mini-5MP Pin Definition
Pin No.
PIN NAME
TYPE
DESCRIPTION
1
CS
Input
SPI slave chip select input
2
MOSI
Input
SPI master output slave input
3
MISO
Output
SPI master input slave output
4
SCLK
Input
SPI serial clock
5
GND
Ground
Power ground
6
VCC
POWER
3.3V~5V Power supply
7
SDA
Bi-directional
Two-Wire Serial Interface Data I/O
8
SCL
Input
Two-Wire Serial Interface Clock