Application Notes

ArduCAM-M-2MP Hardware Application Note
www.ArduCAM.com
2
1 Introduction
This application note describes the detail hardware operation of ArduCAM-M-2MP camera
shield.
2 Typical Wiring
2.1 Single Camera Wiring
The typical connection between ArduCAM shield and Arduino or etc platform is shown in
the Figure 1. More typically the Figure 2 shows the wiring for Arduino UNO R3 board.
Figure 1 Typical Wiring
Figure 2 Wiring for Arduino UNO R3
2.2 Multi Cameras Wiring
The multi-cameras connection between ArduCAM shield and Arduino or etc platform is
shown in the Figure 3. More typically the Figure 4 shows the multi-cameras wiring for Arduino
UNO R3 board.