OV9281 MIPI Camera Module 1MP Monochrome Global Shutter Camera Module Datasheet Rev 1.
1MP OV9281 MIPI CAMERA MODULE Table of Contents 1 2 3 4 5 6 7 Introduction ............................................................................................................................. 2 Key Specifications ................................................................................................................... 3 Block Diagram ......................................................................................................................... 3 Application.....................
1MP OV9281 MIPI CAMERA MODULE 1 Introduction The Arducam monochrome (B&W) global shutter 1280x800 resolution OV9281 MIPI camera module is mainly designed for Raspberry Pi boards, and it can be connected directly to RPi’s CSI-2 camera interface without additional hardware.
1MP OV9281 MIPI CAMERA MODULE 2 Key Specifications Parameter Typical Value Sensor Monochrome global shutter OV9281 Pixel Size 3 μm x 3 μm Active array size 1280 x 800 Optical Size 1/4 inch Default Lens M27280M07S EFL 2.8 mm F.NO 2.
1MP OV9281 MIPI CAMERA MODULE 5 Pin Definition The OV9281 module uses standard Raspberry Pi camera pinout. The pin number is listed below. Table 1 J1 Connector Pin Definition Pin No.
1MP OV9281 MIPI CAMERA MODULE 6 Mechanical Dimension 7 Lens Options The camera board shipped with default M12 mount low distortion lens M27280M07S. Lens specification lists as follows. Please contact us sales@arducam.com for more lens options or visit http://www.arducam.com/product-category/lenses/. 5 www.ArduCAM.
