Low Distortion IMX219 M12 Mount Camera Module for Raspberry Pi - Datasheet
Table Of Contents
- Description
 - Features
 - Device Structure
 - USE RESTRICTION NOTICE
 - 1. Block Diagram and Pin Configuration
 - 2. Pixel Signal Output Specifications
 - 3. Control Registers
- 3-1 2-wire Serial Communication Operation Specifications
 - 3-2 2-wire Serial Communication Register Map (Configuration register, Parameter limit register)
 - 3-3 Parameter Limit Registers – [0x1000-0x1FFF] (Read Only and Static)
 - 3-4 Manufacturer Specific Registers – [0x3000-0x5FFF ]
 - 3-5 Frame Bank A and Bank B specific output samples
 
 - 4. Output Data Format
 - 6. On Chip Image Processing
 - 7. NVM Memory Map
 - 8. How to operate IMX219PQH5-C
 - 9. Other Functions
 - 10. Electrical Characteristics
 - 11. Spectral Sensitivity Characteristic
 - 12. Image Sensor Characteristics
 - 13. Measurement Method for Image Sensor Characteristics
 - 14. Spot Pixel Specification
 - 15. Notice on White Pixels Specifications
 - 16. Chief Ray Angle Characteristics
 - 17. Connection Example
 - 18. Notes On Handling
 
IMX219PQH5-C 
49 
4-1-4    Data type 
Data types of each line are shown as below. 
Table 13 Image pixel area and data type 
image pixel area 
Data Type 
Embedded Data Lines 
Embedded Data 
OBside ineffective area 
Null 
OB area for internal use 
Null 
effective OB 
OPB Data 
Effective area side ineffective area 
Null 
effective pixel 
RAW10 or RAW8 or COMP8 
4-1-5 CSI-2 Frame Format 
The data format of each line is based on CSI-2 General Frame Format. 
The period from a line end sync code to the line start sync code for the next line is called the line blanking period. 
Likewise, the period from a frame end sync code to the next frame start sync code is called the frame blanking 
period. Packet header consists of the following data. 
Table 14 Sync Code Settings 
Header   
[7:0] 
Description 
Setting register 
Remarks 
[7:6] 
Virtual Channel Identifier 
Addr: 0x0110 
See Register Section 
CSI_channel_identifier   
[5:0] 
Synch Short Packet Data types 
NA 
 
Frame Start Code 
NA 
 
Frame End Code 
NA 
 
Embedded Data 
NA 
Written data in the sensor 
A 
RAW8 
CSI_data_format   
0808 
B 
RAW10 
CSI_data_format   
A0A 










