Low Distortion IMX219 M12 Mount Camera Module for Raspberry Pi - Datasheet
Table Of Contents
- Description
 - Features
 - Device Structure
 - USE RESTRICTION NOTICE
 - 1. Block Diagram and Pin Configuration
 - 2. Pixel Signal Output Specifications
 - 3. Control Registers
- 3-1 2-wire Serial Communication Operation Specifications
 - 3-2 2-wire Serial Communication Register Map (Configuration register, Parameter limit register)
 - 3-3 Parameter Limit Registers – [0x1000-0x1FFF] (Read Only and Static)
 - 3-4 Manufacturer Specific Registers – [0x3000-0x5FFF ]
 - 3-5 Frame Bank A and Bank B specific output samples
 
 - 4. Output Data Format
 - 6. On Chip Image Processing
 - 7. NVM Memory Map
 - 8. How to operate IMX219PQH5-C
 - 9. Other Functions
 - 10. Electrical Characteristics
 - 11. Spectral Sensitivity Characteristic
 - 12. Image Sensor Characteristics
 - 13. Measurement Method for Image Sensor Characteristics
 - 14. Spot Pixel Specification
 - 15. Notice on White Pixels Specifications
 - 16. Chief Ray Angle Characteristics
 - 17. Connection Example
 - 18. Notes On Handling
 
IMX219PQH5-C 
24 
Table 9 2-wire Serial Communication AC Timing (Fast mode) 
Item 
Symbol 
Min. 
Max. 
Unit 
SCL clock frequency ( INCK[fSCK] = 6 to 27 MHz) 
f
SCL
0 
400 
kHz 
Rise time (SDA and SCL) 
t
R
― 
300 
ns 
Fall time (SDA and SCL) 
t
F
― 
300 
ns 
Hold time (start condition) 
t
HDSTA
0.6 
― 
µs 
Setup time (rep.-start condition) 
t
SUSTA
0.6 
― 
µs 
Setup time (stop condition) 
t
SUSTO
0.6 
― 
µs 
Data setup time 
t
SUDAT
100 
― 
ns 
Data hold time 
t
HDDAT
0 
0.9 
µs 
Bus free time between Stop and Start condition 
t
BUF
1.3 
µs 
Low period of the SCL clock 
t
LOW
1.3 
µs 
High period of the SCL clock 
t
HIGH
0.6 
µs 
3-1-4 2-wire serial communication register map 
3-1-4-1    Description of 2-wire communication register map 
In 2-wire serial communication, there is a 16-bit address space as follows. In IMX219PQH5-C, there are 
partially unreadable registers, which is described in Register map. If reading unreadable registers, the value to 
be read is 00h. 
Table 10 2-wire Serial Communication Register Map Address Areas 
Address Area 
Description 
0x0000 - 0x0fff 
Configuration register 
0x1000 - 0x1fff 
Parameter limit register 
Read Only and Static resister 
0x3000 - 0xffff 
Manufacture specific register 










