Datasheet
Table Of Contents
- applications
- features
- key specifications
- table of contents
- list of figures
- list of tables
- 1 signal descriptions
- 2 system level description
- 3 block level description
- 4 image sensor core digital functions
- 4.1 mirror and flip
- 4.2 image windowing
- 4.3 test pattern
- 4.4 50/60Hz detection
- 4.5 AEC and AGC algorithms
- 4.6 AEC/AGC steps
- 4.7 black level calibration (BLC)
- 4.8 strobe flash and frame exposure
- 4.9 xenon flash control
- 4.10 frame exposure (FREX) mode
- 4.11 FREX strobe flash control
- 4.12 one-time programmable (OTP) memory
- 5 image sensor processor digital functions
- 6 image sensor output interface digital functions
- 7 register tables
- table 7-1 system control registers (sheet 1 of 5)
- table 7-2 SCCB registers (sheet 1 of 2)
- table 7-3 group hold control registers
- table 7-4 AEC/AGC 1 registers
- table 7-5 system timing registers (sheet 1 of 3)
- table 7-6 AEC/AGC 2 registers (sheet 1 of 3)
- table 7-7 STROBE/frame exposure control registers (sheet 1 of 2)
- table 7-8 50/60 HZ DETECTION registers
- table 7-9 OTP control registers (sheet 1 of 2)
- table 7-10 BLC registers (sheet 1 of 3)
- table 7-11 frame control registers
- table 7-12 DVP registers (sheet 1 of 2)
- table 7-13 MIPI top registers (sheet 1 of 11)
- table 7-14 ISPFC registers
- table 7-15 ISP TOP control registers (sheet 1 of 6)
- table 7-16 AWB registers (sheet 1 of 3)
- table 7-17 average registers (sheet 1 of 2)
- table 7-18 DPC registers
- table 7-19 LENC registers (sheet 1 of 4)
- table 7-20 cluster DPC registers (sheet 1 of 2)
- table 7-21 windows registers
- table 7-22 AEC/AGC 3 registers
- 8 operating specifications
- 9 mechanical specifications
- 10 optical specifications
- revision history
Confidential for truly Only
11.03.2009 PRELIMINARY SPECIFICATION proprietary to OmniVision Technologies
7-23
table 7-13 MIPI top registers (sheet 1 of 11)
address
register name
default
value
R/W
description
0x4800 MIPI CTRL 00 0x04 RW
MIPI Control 00
Bit[7]: mipi_hs_only
0: MIPI can support CD and
ESCAPE mode
1: MIPI always in high speed mode
Bit[6]: ck_mark1_en
0: Not used
1: Enable clock lane mark1 when
resume
Bit[5]: Clock lane gate enable
0: Clock lane is free running
1: Gate clock lane when no packet
to transmit
Bit[4]: Line sync enable
0: Do not send line short packet for
each line
1: Send line short packet for each
line
Bit[3]: Lane select
0: Use lane1 as default data lane
1: Use lane2 as default data lane
Bit[2]: Idle status
0: MIPI bus will be LP00 when no
packet to transmit
1: MIPI bus will be LP11 when no
packet to transmit
Bit[1]: Clock lane first bits
0: Output 0x55
1: Output 0xAA
Bit[0]: Clock lane disable
0: Not used
1: Manually set clock lane to low
power mode