Datasheet
Table Of Contents
- applications
- features
- key specifications
- table of contents
- list of figures
- list of tables
- 1 signal descriptions
- 2 system level description
- 3 block level description
- 4 image sensor core digital functions
- 4.1 mirror and flip
- 4.2 image windowing
- 4.3 test pattern
- 4.4 50/60Hz detection
- 4.5 AEC and AGC algorithms
- 4.6 AEC/AGC steps
- 4.7 black level calibration (BLC)
- 4.8 strobe flash and frame exposure
- 4.9 xenon flash control
- 4.10 frame exposure (FREX) mode
- 4.11 FREX strobe flash control
- 4.12 one-time programmable (OTP) memory
- 5 image sensor processor digital functions
- 6 image sensor output interface digital functions
- 7 register tables
- table 7-1 system control registers (sheet 1 of 5)
- table 7-2 SCCB registers (sheet 1 of 2)
- table 7-3 group hold control registers
- table 7-4 AEC/AGC 1 registers
- table 7-5 system timing registers (sheet 1 of 3)
- table 7-6 AEC/AGC 2 registers (sheet 1 of 3)
- table 7-7 STROBE/frame exposure control registers (sheet 1 of 2)
- table 7-8 50/60 HZ DETECTION registers
- table 7-9 OTP control registers (sheet 1 of 2)
- table 7-10 BLC registers (sheet 1 of 3)
- table 7-11 frame control registers
- table 7-12 DVP registers (sheet 1 of 2)
- table 7-13 MIPI top registers (sheet 1 of 11)
- table 7-14 ISPFC registers
- table 7-15 ISP TOP control registers (sheet 1 of 6)
- table 7-16 AWB registers (sheet 1 of 3)
- table 7-17 average registers (sheet 1 of 2)
- table 7-18 DPC registers
- table 7-19 LENC registers (sheet 1 of 4)
- table 7-20 cluster DPC registers (sheet 1 of 2)
- table 7-21 windows registers
- table 7-22 AEC/AGC 3 registers
- 8 operating specifications
- 9 mechanical specifications
- 10 optical specifications
- revision history
Confidential for truly Only
color CMOS QSXGA (5 megapixel) image sensor with OmniBSI™ technology
OV5647
proprietary to OmniVision Technologies PRELIMINARY SPECIFICATION version 1.0
3.2 binning
The OV5647 supports 2x2 binning for better SNR in low light conditions. See table 3-1 for horizontal and vertical binning
registers.
Sub-sampling is necessary when using binning.
Sensor timing adjustment is necessary after applying binning. Please consult your local OmniVision FAE for details.
figure 3-2 example of 2x2 binning
3.3 analog amplifier
When the column sample/hold circuit has sampled one row of pixels, the pixel data will shift out one-by-one into an
analog amplifier.
3.4 10-bit A/D converters
The balanced signal is then digitized by the on-chip 10-bit ADC. It can operate at up to 27 MHz and is fully synchronous
to the pixel clock. The actual conversion rate is determined by the frame rate.
table 3-1 horizontal and vertical binning registers
address
register name
default
value
R/W
description
0x3820 TIMING_TC_REG20 0x40 RW
Bit[0]: Vertical binning
0: Disable
1: Enable
0x3821 TIMING_TC_REG21 0x00 RW
Bit[0]: Horizontal binning
0: Disable
1: Enable
B G
G R
B G
G R
B G
G R
B G
G R
B G
G R
B G
G R
B G
G R
B G
G R
B G
G R
B G
G R
5647_DS_3_2










