Datasheet

PDF: 09005aef8202ec2e/Source: 09005aef8202ebf7 Micron Technology, Inc., reserves the right to change products or specifications without notice.
MT9D111__7_REV5.fm - Rev. B 2/06 EN
177 ©2004 Micron Technology, Inc. All rights reserved.
MT9D111 - 1/3.2-Inch 2-Megapixel SOC Digital Image Sensor
Electrical Specifications
Micron Confidential and Proprietary
Notes: 1. Due to the influence of several variables (scene illumination, output load) max values are
not available.
Table 43: DC Electrical Definitions and Characteristics
Symbol Definition Conditions MIN TYP MAX Units Note
V
DD Core digital voltage
1.7 1.8 1.95 V
V
DDQ I/O digital voltage
1.7 2.8 3.1 V
V
DDGPIO GPI/O digital voltage
1.7 2.8 3.1 V
V
AA Analog voltage
2.5 2.8 3.1 V
VAAPIX Pixel supply voltage
2.5 2.8 3.1 V
V
DDPLL PLL supply voltage
2.5 2.8 3.1 V
V
IH Input high voltage VDDQ = 2.8V
2.4 VDDQ+0.3 V
V
DDQ = 1.8V
1.4 VDDQ+0.3
V
IL Input low voltage VDDQ = 2.8V
GND-0.3 0.8 V
V
DDQ = 1.8V
GND-0.3 0.5
I
IN Input leakage current No pull-up resistor; VIN = VDDQ
or D
GND
-10 +/-0.5 10 μA
V
OH Output high voltage At specified IOH
VDDQ-0.4 V
V
OL Output low voltage At specified IOL
0.4 V
I
OH Output high current At specified VOH =
VDDQ~400MV AT 1.7V VDDQ
-7 x mA
I
OL Output low current At specified VOL~400MV at
1.7V VDDQ
7xmA
I
Oz Tri-state output leakage
current
Vin =VDDQ or GND
-10 +/-0.5 10 μA
I
DD1 Digital operating current Context B, 1600x1200, JPEG
on, MCLK=Max, PIXCLK=Max
92 110 mA
I
DDQ1 I/O digital operating current Context B, 1600x1200, JPEG
on, MCLK=Max, PIXCLK=Max
1.5 mA 1
I
AA1 Analog operating current Context B, 1600x1200, JPEG
on, MCLK=Max, PIXCLK=Max
43 55 mA
IAAPIX1 Pixel supply current Context B, 1600x1200, JPEG
on, MCLK=Max, PIXCLK=Max
2.1 3.5 mA
IDDPLL1 PLL supply current Context B, 1600x1200, JPEG
on, MCLK=Max, PIXCLK=Max
2.3 3 mA
I
DD2 Digital operating current Context A, 800x600, No JPEG,
MCLK=Max, PIXCLK=Max
48 60 mA
I
DDQ2 I/O digital operating current Context A, 800x600, No JPEG,
MCLK=Max, PIXCLK=Max
15 mA 1
IAA2 Analog operating current Context A, 800x600, No JPEG,
MCLK=Max, PIXCLK=Max
27 35 mA
IAAPIX2 Pixel supply current Context A, 800x600, No JPEG,
MCLK=Max, PIXCLK=Max
45.5mA
IDDPLL2 PLL supply current Context A, 800x600, No JPEG,
MCLK=Max, PIXCLK=Max
2.3 3 mA
ISTDBY1 Standby current PLL enabled PLL enabled (MCLK = 0Hz, held
at either VIL or VIH)
35 100 μA
ISTDBY2 Standby current PLL disabled PLL disabled (MCLK = 0Hz,
held at VIL or VIH)
35 100 μA