Datasheet

PDF: 09005aef8202ec2e/Source: 09005aef8202ebf7 Micron Technology, Inc., reserves the right to change products or specifications without notice.
MT9D111__6_REV5.fm - Rev. B 2/06 EN
104 ©2004 Micron Technology, Inc. All rights reserved.
MT9D111 - 1/3.2-Inch 2-Megapixel SOC Digital Image Sensor
JPEG Indirect Registers
Micron Confidential and Proprietary
GPIO_WG_T11 7:0
Second subperiod of waveform output at GPIO1 (in 8-bit counter
mode) or bits 15:8 of second subperiod of the waveform output at
GPIO0 (in 16-bit counter mode).
1082 0
GPIO_WG_T10 7:0
Second subperiod of waveform generated at GPIO0 (in 8-bit
counter mode) or bits 7:0 of the same (in 16-bit counter mode).
1083 0
GPIO_WG_T21 7:0
Third subperiod of waveform output at GPIO1 (in 8-bit counter
mode) or bits 15:8 of third subperiod of waveform output at GPIO0
(in 16-bit counter mode).
1084 0
GPIO_WG_T20 7:0
Third subperiod of waveform generated at GPIO0 (in 8-bit counter
mode) or bits 7:0 of the same (in 16-bit counter mode).
1085 0
GPIO_WG_T31 7:0
Fourth subperiod of waveform output at GPIO1 (in 8-bit counter
mode) or bits 15:8 of fourth subperiod of waveform output at
GPIO0 (in 16-bit counter mode).
1086 0
GPIO_WG_T30 7:0
Fourth subperiod of waveform generated at GPIO0 (in 8-bit
counter mode) or bits 7:0 of the same (in 16-bit counter mode).
1087 0
GPIO_WG_T41 7:0
Fifth subperiod of waveform generated at GPIO1 (in 8-bit counter
mode) or bits 15:8 of 5th subperiod of waveform output at GPIO0
(in 16-bit counter mode).
1088 0
GPIO_WG_T40 7:0
Fifth subperiod of waveform generated at GPIO0 (in 8-bit counter
mode) or bits 7:0 of the same (in 16-bit counter mode).
1089 0
GPIO_WG_N1 7:0
Writing to this register sets the duration of waveform generated at
GPIO1 (in 8-bit counter mode) or bits 15:8 of the duration of
waveform generated at GPIO0 (in 16-bit counter mode). Finite
duration is selected by writing the desired number of periods in the
waveform. Writing “0“makes the duration infinite.
When read, this registers returns the number of waveform periods
left to be generated at GPIO1 (in 8-bit counter mode) or bits 15:8 of
the number remaining at GPIO0 (in 16-bit counter mode). To get all
16 bits of the latter number correct, one must read this register
before GPIO_WG_N0.
108A 0
GPIO_WG_N0 7:0
Writing to this register sets the duration of waveform generated at
GPIO0 (in 8-bit counter mode) or bits 7:0 of the same (in 16-bit
counter mode). Finite duration is selected by writing the desired
number of periods in the waveform. Writing “0” makes the
duration infinite.
When read, this register returns the number of waveform periods
left to be generated at GPIO0 (in 8-bit counter mode) or bits 7:0 of
the same (in 16-bit counter mode).
108B 0
GPIO_WG_T03 7:0
First subperiod of waveform generated at GPIO3 (in 8-bit counter
mode) or bits 15:8 of first subperiod of waveform output at GPIO2
(in 16-bit counter mode).
108C 0
GPIO_WG_T02 7:0
First subperiod of waveform generated at GPIO2 (in 8-bit counter
mode) or bits 7:0 of the same (in 16-bit counter mode).
108D 0
GPIO_WG_T13 7:0
Second subperiod of waveform output at GPIO3 (in 8-bit counter
mode) or bits 15:8 of second subperiod of waveform output at
GPIO2 (in 16-bit counter mode).
108E 0
GPIO_WG_T12 7:0
Second subperiod of waveform generated at GPIO2 (in 8-bit
counter mode) or bits 7:0 of the same (in 16-bit counter mode).
108F 0
Table 23: GPIO Registers (continued)
Register Name Bits Register Content/Function
Addr
(Hex) Default