User's Manual

Signal indication LEDs flash
every second
Melody is rapider
Melody is slower and diminuendo
Signal indication LEDs flash
every second
Melody is slower and short
beep every second
!
(i) Search, detection, and alarm range can be affected on different.
If the beep sound is not loud enough, the batteries may be low. Change with new batteries for louder alarm sound.
This product only assists in providing a warning alarm to remind the user. It does not guarantee to prevent theft or
robbery of personal property.
batteries
your
batteries sources. It may cause danger or even explosion.
Sleeping
Low battery
Alarm
Diasble Alarm funstion: During at standby
mode, the master and Sllave wuthin 2
meters, power off the Master unit.
Enable Alarm function: Switch the Master
power on.
Mute
Press the Mute botton to mute searching melody from the Master unit. Listen to beep sound from the Slave
unit to assist short range searching.
Switch the Power button to ON
More LEDs light up
LEDs light decreasingly
Turn off the search melody of Master(long press the Mute button)
Search
Signal indication LEDs flash
Signal indication LEDs flash
every second
Signal indication LEDs flash
every second
High beeps while re-linking
High beep every second
Low battery
Disconnect
Under standy mode, press the
”Search” button
may
b.) When switching the Master unit power on, the Signal indication LED flashed as searching the
Slave unit. If the Master and Slave units are out of working range, the Signal indication LED
remains light while the Master unit could not find Slave unit.
Switch the power button of the Master unit to OFF, when search function is not needed. Once you need this
kit to resume the standy mode, just turn the power button of the Master to ON.
Important: a.) Please keep the Slave at ON status if you would turn the Master into Sleep mode.
c.) Please trun off the Master and Slave unit if NOT in sue to save battery life.
If you want to use the device on the airplane, please comply with the flight safety law according to each country.
This product operation temperature is between 32ʲ ~140ʲÛ&aÛ&. Storage temperature is between -4ʲ
~185ʲ
Û&aÛ&
91E-02B4-U50G00
** The connection range depends on the terrain
environment because of readio efficiency.