Phau Ntawv Qhia
-14-
EN
OPERATION
• Take out the scale, and open up the battery cover, install
the batteries to the battery compartment
• Put the scale on a at table, and ensure it is steady.
WEIGHTING STEP
1. Press the key of “ON/OFF/TARE” to power on. “0”
appears on the display after 3 seconds.
2. Press the key of “UNIT”, you can choose volume unit or
weight unit.
3. Put the container or milk in the cup, the LCD screen
will show the weight of container or volume.
ERROR DISPLAY INTRODUCTION
• When the scale is over loaded, the “O-Ld” will appear
on the display.
• When the screen shows “ Lo ”, it means that there is a
power shortage, please change the batteries as soon
as possible.
INTRODUCTION OF USING AND INSTALLING
THEBATTERIES
• Use 2 х AAA batteries
• When you change the batteries, please open the
battery cover on the back, put 2 pcs AAA battery in the
battery case then close the battery cover tight.