Instruction Manual

EN
14
SAFETY MEASURES
1. Read this instruction manual carefully before using the
device, save it for future reference.
2. The device must be installed on a stable, dry and level
surface and used in accordance with the instructions given
in this instruction manual.
3. Do not expose the device to sudden temperature changes.
A sudden change in temperature (for example, bringing
the device from a cold place into a warm room) can cause
condensation of moisture inside the device and disrupt its
performance when turned on. The device should be in a
warm room for at least 1.5 hours. Putting the device into
operation after transportation should be carried out no
earlier than 1.5 hours after bringing it into the room.
4. Ensure that the power cord does not hang over the edge of
a table or counter, bend or twist, or touch hot surfaces.
5. Before use, make sure that the mains voltage corresponds to
the nominal value indicated on the product.
6. To avoid risks, do not connect the device to the timer.
7. Before use, check for damage to all parts of the device,
the power cord, the outlet, and if there is damage
or deformation, stop using the juicer and contact an
authorized service center.
8. The device is intended for household use only. Do not
use for commercial purposes. Use the device only for its
intended purpose.
9. Do not use the device outdoors.
10. To avoid the risk of electric shock, do not immerse the
device in water or other liquids.
11. WARNING! Do not use the appliance if the rotating sieve is
damaged.
12. Do not use the device if the device or power cord is
damaged.
13. Do not attempt to repair or modify the device yourself.
Contact an authorized service center for help.
14. If the power cord is damaged, it must be replaced by