Instruction Manual

EN
20
using an old and unnecessary fabric.
Brushes for fabrics or fur
• Use the brush so that the steam penetrates the fabric, eectively
smoothing out creases
Note: make sure the brush is cold when installing.
• When installing the brush, turn the steamer handle plate
upwards, press the brush and tighten the locking clip.
• Move the brush from upwards to downwards.
• Before removing the brush, turn o the power. Remove the
brush when steam stops coming out of the steam brush.
CAUTION: to avoid burns, do not touch the stainless steel panel
on the steamer handle.
Creasing attachment
• This accessory will help to create decorative folds on the hem of
things.
• Place the accessory on the handle of the steamer and press it
rmly.
• While holding the handle of the steamer, open the pressure
panel of the accessory, see Fig. 17.
• Place the fabric between the pressure panel of the accessory.
• Clamp the fabric between the panels and start ironing from top
to bottom, see Fig. 18 and g. 19.
• Before removing the accessory, please turn o the power.
Remove the accessory when steam stops coming from the
steam brush. CAUTION: to avoid burns, do not touch the panel
on the steamer handle.
CLEANING AND STORAGE
• After use, remove the water tank from the housing and
pour out the water.
• Turn on the appliance for 1 minute to dry the system
from residual water. After that, turn o the power and