Phau Ntawv Qhia

15
EN
switching it on. Make sure the water level in the kettle
is above the Min mark.
• Attention: the surface of the heating element remains
hot after use.
• If your kettle switches off before water boiling, you
have to descale the kettle.
DESCALING
• The frequency of descaling depends on the hardness
of the water and how often the appliance is used.
• If the appliance is switched o before the water boils,
it may need to be decalcied.
• Use a special decalcifying agent.
• Use only the quantity indicated in the instructions for
the decalcifying agent.
• Fill the kettle with a solution of a special decalcifying
agent up to the maximum mark and boil.
• Leave the solution in the kettle for several hours.
• Pour out the solution, ll the kettle with clean water
up to the maximum mark and boil. Pour out the
boiled water. Repeat the procedure few times.
CLEANING AND CARE
• WARNING! Before cleaning, disconnect the device
from the power supply.
• Let the device cool down.
• Never use abrasives or sharp objects (knives or
hard brushes) to clean the device.
• Never submerge the device in water. Never wash
the kettle in the dishwasher.
• Use a damp cloth to clean the outside of the kettle.
Make sure that the electrical connectors are not wet.
• If the color of the inside of the kettle body has