Phau Ntawv Qhia

• Use only puried water.

• Do not overll the kettle over the Max level because

boiling water being ejected from the spout while

operating. The minimum amount of water should reach

the Min marking.

• Fill with the desired amount of water and close the lid.

To close lid simply press the lid.

• Place the kettle lled with water on the base.

• Connect the power cable to the mains and turn on the

kettle by pressing the switch, after which the indicator

light will light up.

• The kettle will turn o automatically when the water is

boiling.

• After boiling, allow the kettle to cool for 5 minutes

before relling with water.

• Avoid sudden temperature changes when lling the

kettle with water. Do not ll a hot kettle with cold water

or a cold kettle with hot water.

• Condensation may form on the surface of the base. It

is formed during the automatic shutdown of the kettle

due to the release of steam through the vents in the

base of the kettle. Before reuse, remove condensation

from the surface of the base with a tissue.

USEFUL NOTES

• To prolong the life of the kettle, do not leave the water

overnight, empty the water after use.

• If you accidentally turn on an empty kettle, when the

kettle is heated, the protection against operation

without water will work, the kettle will turn off. Let the

kettle cool for 10 minutes before refilling it with water.

• Attention: Frequent switching on of the device

without water may damage the protection system, so

always check that there is water in the kettle before