User's Manual

32 of 47
You can change the transmit power of the radio to 25%, 50%, 75%, or 100% of the approved
maximum output power. Use the table below to determine the % attenuation conversion. Drag the
slider to select the desired power level and then click on the Save button.
TX Power Level TX Attenuation MetroE Node EIRP
100% 0 dB = 20 dBm TX Power + 17 dB Antenna Gain = 37 dBm
90% 2 36
85% 3 35
75% 5 33
70% 6 32
60% 8 30
55% 9 29
50% 10 28
40% 12 26
30% 14 24
25% 16 22
The transmit power should be set to 90% under normal circumstances.
Setting Active Antenna
The active antenna must be set to 1.