User's Manual

Inside the Subscriber Location, the CM is connected to the PC by means of a
standard Ethernet/LAN cable. Alternatively a LAN hub or switch may be employed
between the CM and the PC(s), as the CM has a gateway function that will support
up to 75 PCs sharing the modem. A small DC inserter device is connected between
the CM and the lead to the outdoor unit. The inserter and most modems each have
cord mounted power supplies.
1.5 Access Point Installation
The multipoint Access Point has two installation options: pole mount and strand
mount.
The pole mount option is designed to be placed on a utility pole, as in Figure 1-4,
connected to the cable system tap. It is normally powered from the tap as well, but
other options are available.
The strand-mount option is designed to be suspended from a wire strand between
two utility poles, as in Figure 1-5. It is also normally powered from the tap.
Figure 2-4: Pole-mounted Access Point.
ARCXtend manual, August 2003 1-5