User's Manual

1.4 CPE Installation
The ARCXtend License-Free, Point-to-Multipoint Wireless Broadband Solution
subscriber installation consists of the AX3155 Integrated Subscriber Transceiver
mounted on the exterior of the subscriber facility and the Wireless Cable Modem
(CM) located inside the structure. A single power and signal cable is run between
the Subscriber Transceiver and the modem location. See Figure 1-3.
The Subscriber Transceiver is mounted on a short pipe or bent-arm mounting
arrangement similar to a small satellite TV dish, or a light duty non-penetrating flat
roof mount. It must be in a position with line of sight to the Access Point Transceiver
location. At the time of installation the Subscriber Transceiver is carefully aimed to
transmit and receive to/from the Access Point Transceiver.
Later Sections of this manual provide mounting information and grounding
recommendations for the Subscriber Transceiver.
Figure 1-3: Photo Subscriber Transceiver.
ARCXtend manual, August 2003 1-4