User's Manual

ARCXTEND 5.8 GHZ USER MANUAL – R1.0, ISSUE 1 Copyright 2005 Arcwave, Inc. 61
reduces ingress noise onto the cable plant, but also decreasing the upstream wireless range.
arcwaveDownstreamAirFreq arcwaveControl 10 1.3.6.1.4.1.8595.1.12.10 This element sets the
downstream wireless channel to be used. (in MHz)
For AX1455: 5813, 5819, 5825, 5831, 5837 and 5843
Integer32 Read/Write Current N/A
arcwaveDownstreamEnable arcwaveControl 11 1.3.6.1.4.1.8595.1.12.11 This element turns on the
downstream wireless transmitter in the Hub.
1 = true 2 = false
Integer Read/Write Current False
arcwaveUpstreamEnable arcwaveControl 12 1.3.6.1.4.1.8595.1.12.12 This element turns on the
upstream wireless receiver in the Hub.
1 = true 2 = false
Read/W rite Current False
arcwaveSetQAMMode arcwaveControl 13 1.3.6.1.4.1.8595.1.12.13 This element selects the
Downstream Power Setting: High, Medium or Low.
0 = High 1 = Medium 3 = Low
Integer Read/Write Current Low
arcwaveAlarmMask arcwaveControl 14 1.3.6.1.4.1.8595.1.12.14 Sets the alarm mask for
the AR300 module. All 0’s masks all alarms, all F’s lets all alarms through, values in between will mask the corresponding alarm.
0000 to FFFF
SnmpAdm inString
Read/Write Current FFFF
arcwaveAlarmDestination arcwaveControl 15 1.3.6.1.4.1.8595.1.12.15 Sets the IP address of the
SNMP Traps Monitor. SNMP traps are sent to this address when control mode is set to “HTTP”
IP Address
IpAddress Read/Write Current 0.0.0.0
arcwaveRealtimemonitor arcwaveControl 16 1.3.6.1.4.1.8595.1.12.16 Fetches Real Time
Monitoring information from the ArcXtend Hub
1 = true 2 = false
Integer Read/Write Current 2
arcwaveBOM arcwaveControl 17 1.3.6.1.4.1.8595.1.12.17 This element turns
PureBurst ingress noise suppression on or off
0 = Off 1 = On
Integer Read/Write Current On
arcwaveClearalarm arcwaveControl 18 1.3.6.1.4.1.8595.1.12.18 Clears alarms
1 = true 2 = false
Integer Read/Write Current 2
fwDloadInformation productType 14