User's Manual

ARCXTEND 5.8 GHZ USER MANUAL – R1.0, ISSUE 1 Copyright 2005 Arcwave, Inc. 60
frequencies: 1 = arcwaveUpstreamFreq + DOCSIS upstream frequency 2 = arcwaveUpstreamFreq - DOCSIS upstream frequency (in MHz) This element is included for possible future support of frequency diversity. It can also be used when interference is experienced one of the two channels.
arcwaveUpstreamFreq arcwaveControl 7 1.3.6.1.4.1.8595.1.12.7 This element contains the
upstream wireless frequency (in MHz) that is being used. The BRM-3520 Cable Modem programs the AR300 Extender Module with this value based on its assigned upstream DOCSIS channel. There is a one-to-one relationship between the upstream wireless frequency and the upstream DOCSIS channel.
6.4 to 48 in 0.1 increments(i n MHz) Valid range for AX1455 is 6.4 to 48 and for AX1455 is 10 to 48
Integer32 Read Only Current N/A
arcwaveEIAInputchannel arcwaveControl 8 1.3.6.1.4.1.8595.1.12.8 This element displays the
downstream channel that is being used. The BRM-3520 Cable Modem programs the AR300 Extender Module with this value based on its downstream channel.
See Appendix A for a listing of EIA channel numbers and associated frequencies
Integer32 Read-Only Current N/A
arcwaveUpstreamAttentuation arcwaveControl 9 1.3.6.1.4.1.8595.1.12.9 This element sets the gain
on the upstream receiver. The higher the value the more attenuation is applied to the upstream receiver. Increasing the attenuation
0 to 64 (in dB) and 99. When set to 99, the gain will be set automatically
Integer32 Read/Write Current 99